Description
VOLTZ tools YL-10T Hydraulic Pullers (10 tons)
The hydraulic puller is a new ideal tool to replace the traditional puller. It has the characteristics of compact structure, flexible use, convenient carrying and operation, less labour-saving, and less restricted by the site. It is suitable for various maintenance sites.
- 1. Tighten the oil return valve stem in a clockwise direction before use
- 2. Adjust the jaw seat to the jaw hook to grab the object being pulled.
- 3. Tilt the piston starting rod back and forth to move forward steadily, and the jaw hooks back accordingly to pull out the pulled object.
- 4. If the extension distance of the piston starting rod is required to be greater than the effective distance of the hydraulic puller piston starting rod during use, you need to stop when the extension distance is connected to the maximum effective distance, loosen the oil return valve rod, and allow the piston starting rod to retract and adjust After finishing, repeat steps 1-3 again until it is pulled out.
- 5. To loosen the oil return valve stem, just slightly loosen the oil return valve counterclockwise. The piston starting rod gradually retracts under the action of the spring.
Specification: – Material: 45# Steel – Max Capacity: 10T – Ares Travel: 2″(50mm) – Min/Max Reach: 0-6″(0-160mm) – Min/Max Spread: 4″-10″(100-250mm) – Weight: 22Lbs – Overall Dimension: 16.5″x8.7″x22.4″ Package Content: – 1x Hydraulic Puller – 1x Handle – 1x 2/3 Leg Puller Yoke – 3x Jaws – 6x Link Plates – 1x Nose Adaptor – 6 Sets of Nuts and Bolts – 1x Carrying Case
|
|
|
|---|---|---|
Turn the switch to ON when in use, so you can pressurize Turn the switch to OFF after use so that the pressure can be relieved. | Integrated pump, tubing and drawing machine into one body. The integrated moulding has better quality and greatly extends the service life of the product. | One-piece oil cover, the oil pump does not leak oil, giving you a better operating experience. |
|
|
|
|---|---|---|
- The effective distance of the piston starting rod of the hydraulic puller is only 1.97inches/50mm, so the extension distance should not be greater than 1.97inches/50mm during use.
- If you want to retract the piston activation rod, you only need to slightly loosen the oil return valve rod in a counterclockwise direction, and the piston activation rod will gradually retract.
- Before use, the hydraulic puller of the corresponding tonnage should be selected according to the outer diameter of the object to be pulled, saw and load force, and avoid damage caused by overloading.
- The hydraulic puller uses (GB443-84) N15 mechanical oil at – 5-45℃ and (GB442-64) synthetic spindle oil at – 20 ~5℃.
- As the new or long-term used hydraulic puller has more air in the cylinder, please move the handle first without load 2-3 times to eliminate air.
Max Capacity: 10T; Ares Travel: 2″(50mm)
Min/Max Reach: 0-6″(0-160mm); Min/Max Spread: 4″-10″(100-250mm)
Suitable for pulling hubs, flanges, gears, bearings and more
3 in 1 – integrates pumps, oil tube and drawing machine
Pump head can be turned by 360°for flexibility
Reviews
There are no reviews yet.